Do you want to know how to switch off KPLC meter alarm? Check this guide.
The sound produced by the Kenya Power meter is disturbing.
If that alarm-like sound has been disturbing you here, I’ll share with you how to switch off the Kenya Power meter alarm.
KPLC programmed the prepaid meter to trigger the alarm to notify you that the token is almost used.
The alarm is triggered if the numbers of the token are below 20 units.
Following not every Kenya can buy more than 20 units the sound produced by the meter can thus be disturbing. It is this reason there is a way to silence the alarm.
The alarm is important if you use electricity, especially for commercial purposes, to avoid disconnection because you forgot to buy tokens or units.
How To switch off KPLC meter alarm
If you’re a prepaid KPLC consumer, you must have a story about how irritating the meter alarm-like sound is.
The sound can even be a nuisance, preventing you from sleeping peacefully.
Many folks choose to turn off the meter.
But I’ll show you how to stop it here, and you’ll never hear that sound again.
The process for silencing a KPLC meter varies depending on the meter brand installed by KPLC in your house.
The most popular meter brands includer, Hexing, Nirav, Conlog Intech, and Actaris. Based on the brand of your prepaid meter in your house, here’s how to silence the alarm:
Many households use this mode ad you can silence it by pressing 812, hash (#), or press 812, then “Enter.”
After confirming your meter model is “Nirav Star Instrument,” you can silence it by pressing 1037 then pressing the “Enter” button three times.
3. Conlog Intech
If the meter installed in your house is branded Conlog, you can silence the alarm by long-pressing (#) button to silence the alarm-like sound.
You can silence the meter under this model by long-pressing the “Enter” button.
You can silence the meter under this model by Pressing 016 then hitting the “Enter” button.
You can silence the meter under this model by Pressing 1037 then hit the “Enter” button three times.
You can silence the meter under this model by long-pressing Enter’ button
You can silence the meter under this model by Pressing 812 then the hash (#) button.
There may be times when you try the recommended process to silence the meter under your model, but it does not stop.
Why not attempt the other mode’s method of silencing your mode?